ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
OUR PLATFORMS MUST BE SERVICED USING ORIGINAL MANITOU PARTS.
BY ALLOWING THE USE OF NON ORIGINAL MANITOU PARTS, YOU RISK:
t
IMPORTANT
t
THE USE OF COUNTERFEIT PARTS OR COMPONENTS NOT APPROVED BY THE MANUFACTURER, MEANS YOU LOSE THE BENEFIT OF THE CONTRACTUAL GUARANTEE.
• Legally - to incur liability in the event of an accident.
• Technically, causing operating malfunctions and reducing the access platform’s service life.
BY USING ORIGINAL MANITOU PARTS FOR MAINTENANCE OPERATIONS, YOU BENEFIT FROM OUR KNOW-HOW
Through its network, MANITOU provides the user with,
• Know-how and competence.
• The guarantee of high-quality work.
• Original replacement parts.
• Help with preventive maintenance.
• Efficient help with diagnosis.
• Improvements due to experience feedback.
• Operator training.
• Only the MANITOU network has detailed knowledge of the design of the access platform and therefore the best
technical ability to provide maintenance.
t
IMPORTANT
t
ORIGINAL REPLACEMENT PARTS ARE DISTRIBUTED EXCLUSIVELY BY MANITOU AND ITS DEALER NETWORK.
The dealer network list is available on the MANITOU web site: www.manitou.com
INTRODUCTION
MAINTENANCE OPERATIONS REQUIRE SPECIFIC PRECAUTIONS.
t
IMPORTANT
t
Unless specific instructions are given, during maintenance operations:
- The platform must be on a level surface. The wheels must be chocked.
- The platform should be in transport position,
e
2-DESCRIPTION: OPERATING THE PLATFORM: TRANSPORT/WORKING POSITION.
- The turntable, the basket and the jib (150AETJ 3D (150AETJC3D)) should be in neutral position,
e
2-DESCRIPTION: OPERATING THE PLATFORM: TRANSPORT/
WORKING POSITION.
- The jib must be fully lowered.
- It is essential that the turntable is locked,
e
2-DESCRIPTION: SAFETY COMPONENTS: TURNTABLE LOCKING PIN.
- The basket must be empty.
In order to maintain the connectivity of the machine, some of the equipment remains powered on even if the battery cut-off is in the off position,
e
2-DESCRIPTION:
STICKERS.
3 - 3
647536 (26/11/2020)
150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L