1 - 5
C - MODIFYING THE PLATFORM
t
IMPORTANT
t
It is strictly prohibited to replace platform components with components not approved by Manitou (batteries, wheels, basket, etc.).
t
IMPORTANT
t
It is strictly forbidden to change the structure and settings of the various components of your platform (hydraulic pressure, calibrating limiters, engine speed, sensors,
addition of extra equipment, addition of counterweight, unapproved attachments, alarm systems, etc.) yourself.
In this event, the manufacturer cannot be held responsible.
t
IMPORTANT
t
Risk of the access platform becoming unstable:
- Depending on the model, your platform may be supplied with standard wheels or all-terrain wheels. It is PROHIBITED to change from one type of wheel to the other.
- ELECTRIC PLATFORM: it is PROHIBITED to replace the batteries with lighter batteries.
INSTRUCTIONS
- The operator’s manual must always be in good condition and kept in the place provided on the platform and in the
language used by the operator.
- You must replace the instructions manual, as well as any plates or stickers, if they are no longer legible or are missing
ordamaged.
MAINTENANCE
t
IMPORTANT
t
Refer to chapter: PLATFORM MAINTENANCE INSTRUCTIONS.
- Maintenance or repairs other than those detailed in chapter 3-MAINTENANCE must be carried out by qualified personnel
(consult your dealer) and under the necessary safety conditions to maintain the health of the operator and any third party.
t
IMPORTANT
t
Your platform must be periodically inspected to ensure its continued compliance.
The inspection frequency is defined by the legislation applying in the country in which the platform is used.
- Example for France: The manager in charge of the establishment using an access platform must open and maintain
amaintenance log for each machine (order of 2 March 2004).
647536 (26/11/2020)
150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L
To Next Page
Loading...
Need help?
General
