5
MARA PIGGYBACK SERVICE MANUAL
tools and materials
• Safety Glasses
• Nitrile Gloves
• Lint-Free Rags
• Slickoleum™ Grease
• 10-Oz Tub – Manitou Part Number 20-32929
• 5Ml Tube – Manitou Part Number 141-33604-K001
• 5wt Maxima Synthetic shock Oil Manitou Part Number 85-0023
• *For cold weather use Maxima Synthetic All Temperarture 3wt fork oil.
(PN 141-34078-K016)*
• Isopropyl Alcohol
• 3/8 drive socket wrench
• 16mm socket
• Torque wrench
• 21mm crows foot
• Free Hub Tool Park Tool PN FR-1
• Metric hex wrench set
• T-10 Torx wrench
• O-Ring Pick
• Hand Dyno
• Bench mounted vise
• Side cutters
• Small athead screw driver
• Caliper for measuring IFP depth
• Shock Pump
• ½-13 UNC taper tap
• Blue medium strength Loctite
• Red high strength Loctite
• Mara Pro complete rebuild kit 142-37512-K032
• Air piston OD seal bullet tool PN 172-32189-K001
• Manitou Clamp Block PN 172-31464
• Manitou shaft seal bullet tool ID of the air piston PN 142-37512-K040
• Air Can / Reservoir Wrench PN 142-37512-K033
• Compression Assembly Pin Spanner HBG PN 142-37512-K031
• Air Piston Seal Pusher Tool PN 172-32189-K001
• Shaft Seal Bullet Tool PN 142-37512-K040
• Manitou Air Can Negative Seal Stop Install Tool 172-32193-K001
• Manitou Air Piston Bushing and Seal Tool 172-32192-K001
• Manitou Rear Shock Air Piston and Seal Tool 142-37512-K041
• Manitou Trunnion Tool 142-37512-K037
To Next Page
Loading...
Need help?
General
