Manitou MI-X 50L D C ST3A S2 User Manual

SAFETY PLATES AND STICKERS

IMPORTANT

Clean all of the stickers and safety plates to make them legible. It is essential to replace stickers and safety plates which are illegible or damaged.
Check the presence of stickers and safety plates after replacing any spare parts.
EXTERNAL PLATES AND STICKERS
REF. PART NO. DESCRIPTION
1 828054
- Trapping safety instruction
2 Consult your dealer - Manufacturer's plate (according to model)
3
239594
- Sound power level 104dB (MI ... D ST3AB S2 / MI ... G S2)
239596
- Sound power level 106dB (MI-X ... D C ST3A S2)
4 828044
- Fork safety instruction
5 52521805 - Slinging instruction
6 24653 - Slinging instruction
7 300681 - Safety instruction
8 52523299 - Emergency stop button
9 52521562 - Lift truck start-up instruction
10 Consult your dealer - Load chart (according to model) *
11 Consult your dealer - Attachment load chart (according to model)*
12 - Caution, risk of scalding
13 52521587 - Diesel fuel
14 289101 - Tie-down point
15 52521860 - Hydraulic oil tank
16 Consult your dealer - Fuses and relays
* The load chart referred to in the notice is a standard or blank chart. Each lift truck which can be used with an attachment
has a specific chart. To obtain this, consult your dealer.
2-6
647650 (19/02/2018)
M
I-X 50L/60/70 D C ST3A S2 / MI 50L/60/70 D ST3B S2 / MI 50L/60/70 G S2

Manitou MI-X 50L D C ST3A S2 Specifications

General

Brand	Manitou
Model	MI-X 50L D C ST3A S2
Category	Lifting Systems
Language	English