Manitou MI-X 50L D C ST3A S2 - Emergency Stop Button; Horn; Light and Indicator Switch; Switches

6 - SWITCHES
NOTE: The location of the switches may vary depending on the options.
• A- FRONT WINDSCREEN WIPER (OPTION)
• B- FRONT WINDSCREEN WIPER (OPTION)
• C - REAR WINDSCREEN WIPER (OPTION)
• D – OPTION
• E - FLASHING LIGHT
• F - REAR WORKING LIGHT
• G - FRONT WORKING LIGHT
• H - OPTION
7 - LIGHT AND INDICATOR SWITCH
The switch controls the visual signals.
• A - OFF, Indicators and lights switched off.
• B - Right indicator lights.
• C - Left indicator lights.
• D - Sidelights and rear lights.
• E - Main beam headlights and rear lights.
NOTE: Positions D - E can be used without switching on the ignition.
8 - HORN
This push button sounds the horn
9 - EMERGENCY STOP BUTTON

IMPORTANT

Be ready for hydraulic movements suddenly stopping when you press this button.
In case of danger, shuts down the engine.
- Pull the button to disable it before restarting the lift truck.
2-29
GE HF
A DB C
C
B
A
E
A
D
647650 (19/02/2018)
M
I-X 50L/60/70 D C ST3A S2 / MI 50L/60/70 D ST3B S2 / MI 50L/60/70 G S2