IDENTIFICATION OF THE LIFT TRUCK
ENGINE
MI-X ... D C ST3A S2 / MI ... D ST3B S2
"MODEL" Model
"CODE" Code
"E1" Identification
"SERNO" Serial number
"SPEC" Specification
LIFT TRUCK MANUFACTURER’S PLATE
"MODEL" MODEL
"SERIES" SERIES
"Year of manufacture" Year of manufacture
"Model year" Model year
"Serial Nr" Serial No.
"Power" Power
"Unladen mass" Unladen weight
"Rated capacity" Rated capacity
"Authorized gross vehicle weight" Authorised gross vehicle weight
"Drag strain" Pulling force
"Homologation Nr" Homologation No.
"Max vertical force (on trailer hook)"
Maximum vertical force (on towing hook)
"Tyres pressure (bar)" Tyre pressure (bar)
As our policy is to promote a constant improvement in our products, our range of lift trucks may undergo certain modifications,
without any obligation for us to advise our customers.
When you order parts, or when you require any technical information, always specify:
NOTE: For the owner's convenience, it is recommended that a note of these numbers is made in the spaces provided, at
the time of the delivery of the lift truck.
For any further technical information regarding your lift truck refer to: CHARACTERISTICS.
HYDRAULIC PUMP
Model
Serial no. - Month/Year
MI ... G S2
Engine number / Product identification number
2-8
647650 (19/02/2018)
I-X 50L/60/70 D C ST3A S2 / MI 50L/60/70 D ST3B S2 / MI 50L/60/70 G S2
To Next Page
Loading...
Need help?
General
