PICKING UP THE ATTACHMENTS
PICKING UP THE ATTACHMENTS
A - ATTA - ATTACHMENT WITHOUT HYDRAULICS AND ACHMENT WITHOUT HYDRAULICS AND HAND LOCKING DEVICEHAND LOCKING DEVICE
TAKING UP AN ATTACHMENTTAKING UP AN ATTACHMENT
-- Ensure that the attachment is in a Ensure that the attachment is in a position facilitating the locking to the carriage. If it isposition facilitating the locking to the carriage. If it is
not correctly oriented, take the necessary precautions in order to move it safely.not correctly oriented, take the necessary precautions in order to move it safely.
- Check that the locking pin and the clip are in position in the bracket (fig. A).- Check that the locking pin and the clip are in position in the bracket (fig. A).
-- Place the lift truck with the jib fully lowered in front of and parallel to the Place the lift truck with the jib fully lowered in front of and parallel to the attachment, tiltattachment, tilt
the carriage forwards (fig. B).the carriage forwards (fig. B).
-- Bring the carriage under the locking tube of the attBring the carriage under the locking tube of the attachment, slightly lift the jib, incline theachment, slightly lift the jib, incline the
carriage backwards in order to position the attachment (fig. C).carriage backwards in order to position the attachment (fig. C).
- Lift the attachment off the ground to facilitate locking.- Lift the attachment off the ground to facilitate locking.
HAND LOCKINGHAND LOCKING
-- TTake the locking pin and the ake the locking pin and the clip on the bracket (clip on the bracket (fig. A) and lock the fig. A) and lock the attachment (fig.attachment (fig. D).D).
Do not forget to refit the clip.Do not forget to refit the clip.
HAND RELEASINGHAND RELEASING
-- Proceed in the reverse order of paragraph HAND LOCKProceed in the reverse order of paragraph HAND LOCKING while making sure you put backING while making sure you put back
the locking pin and the clip in the bracket (fig. A).the locking pin and the clip in the bracket (fig. A).
LAYING AN ATTACHMENTLAYING AN ATTACHMENT
-- Proceed in the reverse order of paragraph TAKING UP AN AProceed in the reverse order of paragraph TAKING UP AN ATTACHMENT while making sureTTACHMENT while making sure
you place the attachment flat on the you place the attachment flat on the ground and in closed position.ground and in closed position.
AA
BB
CC
DD
To Next Page
Loading...
Need help?
General