1 24
1 24
MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCKMAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
GENERAL INSTRUCTIONSGENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the lift truck.- Ensure the area is sufficiently ventilated before starting the lift truck.
-- Wear clothes suitable for Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect your hairthe maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect your hair,,
if necessary.if necessary.
- Stop the I.C. engine and remove the ignition key, when an intervention is necessary.- Stop the I.C. engine and remove the ignition key, when an intervention is necessary.
- Read the operator’s - Read the operator’s manual carefully.manual carefully.
- Carry out all repairs immediately, even if the repairs concerned are minor.- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak - Repair all leaks immediately, even if the leak concerned is minor.concerned is minor.
-- Make sure that the disposal of Make sure that the disposal of process materials and of sprocess materials and of spare parpare parts is carried out in total safety ts is carried out in total safety and in a ecological wayand in a ecological way..
- Be careful of the risk - Be careful of the risk of burning and splashing (exhaust, radiator, I.C. engine, etc.).of burning and splashing (exhaust, radiator, I.C. engine, etc.).
MAINTENANCEMAINTENANCE
-- Perform the periodic service (see: 3 - Perform the periodic service (see: 3 - MAINTENANCMAINTENANCE) to keep your lift truck in good working conditionE) to keep your lift truck in good working conditions. Failure to perform the periodics. Failure to perform the periodic
service may cancel the contractual guarantee.service may cancel the contractual guarantee.
MAINTENANCE LOGBOOKMAINTENANCE LOGBOOK
-- The maintenance operations carried out in accordance with The maintenance operations carried out in accordance with the recommendations given in part: 3 - MAINTENANCE and the otherthe recommendations given in part: 3 - MAINTENANCE and the other
inspection, servicing or repair operations or modifications performed on the lift truck or its attachments shall be recorded in ainspection, servicing or repair operations or modifications performed on the lift truck or its attachments shall be recorded in a
maintenance logbook. The entrmaintenance logbook. The entry for each operation shall include details of the date of the works, the names of the y for each operation shall include details of the date of the works, the names of the individuals orindividuals or
companies having percompanies having performed them, the type of operation and its frequency, if applicable. The parformed them, the type of operation and its frequency, if applicable. The part numbers of any lift truck it numbers of any lift truck itemstems
replaced shall also be indicated.replaced shall also be indicated.
LUBRICANT AND FUEL LEVELSLUBRICANT AND FUEL LEVELS
- Use the recommended lubricants (never use contaminated lubricants).- Use the recommended lubricants (never use contaminated lubricants).
- Do not fill the fuel tank when the I.C. engine is running.- Do not fill the fuel tank when the I.C. engine is running.
- Only fill up the fuel tank in areas specified for this purpose.- Only fill up the fuel tank in areas specified for this purpose.
- Do not fill the fuel tank to the maximum level.- Do not fill the fuel tank to the maximum level.
-- Do not smoke or approach the Do not smoke or approach the lift truck with a flame, when the fuel tank is lift truck with a flame, when the fuel tank is open or is being filled.open or is being filled.
HYDRAULICHYDRAULIC
-- Any work on the load handling hydrauAny work on the load handling hydraulic circuit is forbidden except for the olic circuit is forbidden except for the operations described in part: 3 - MAINTENANCE.perations described in part: 3 - MAINTENANCE.
- Do not attempt to loosen - Do not attempt to loosen unions, hoses or any hydraulic component with the cirunions, hoses or any hydraulic component with the circuit under pressure.cuit under pressure.
BALANCING VALBALANCING VALVE: It is VE: It is dangerous to change the setting and remove the dangerous to change the setting and remove the balancing valves or safety valves which balancing valves or safety valves which may be fitted to may be fitted to your lift truck cylinders.your lift truck cylinders.
These operations must only be performed by approved personnel (consult your dealer).These operations must only be performed by approved personnel (consult your dealer).
The HYDRAULIC ACCUMULATORS that may be fitted on your lift truck are pressurized units. Removing these accumulators and their pipework is aThe HYDRAULIC ACCUMULATORS that may be fitted on your lift truck are pressurized units. Removing these accumulators and their pipework is a
dangerous operation and must only be performed by approved personnel (consult your dealer).dangerous operation and must only be performed by approved personnel (consult your dealer).
ELECTRICITYELECTRICITY
-- Do not short-circuit the starter relay to start the IC engine. If the forward/reverse seleDo not short-circuit the starter relay to start the IC engine. If the forward/reverse selector is not in neutral and the parking brake ctor is not in neutral and the parking brake isis
not engaged, the lift truck may suddenly start to not engaged, the lift truck may suddenly start to move.move.
- Do not drop metallic items on the battery.- Do not drop metallic items on the battery.
- Disconnect the battery before working on the electrical circuit.- Disconnect the battery before working on the electrical circuit.
To Next Page
Loading...
Need help?
General