Manitou MLT 845 120 LSU 3-E3 Series User Manual

1-261-26

1 27
1 27
BRINGING THE LIFT TRUCK BACK INTO SERVICEBRINGING THE LIFT TRUCK BACK INTO SERVICE
- Remove the waterproof adhesive tape from - Remove the waterproof adhesive tape from all the holes.all the holes.
- Refit the intake hose.- Refit the intake hose.
- Refit and reconnect the battery.- Refit and reconnect the battery.
- Remove the protection from the cylinder rods.- Remove the protection from the cylinder rods.
- Perform the daily service (see: 3 - MAINTENANCE: A - DAILY OR EVERY 10 HOURS SERVICE).- Perform the daily service (see: 3 - MAINTENANCE: A - DAILY OR EVERY 10 HOURS SERVICE).
- Put the handbrake on and - Put the handbrake on and remove the axle stands.remove the axle stands.
- Empty and replace the fuel and replace the fuel filter (see: 3 - MAINTENANCE: D - EVERY 500 HOURS SERVICE).- Empty and replace the fuel and replace the fuel filter (see: 3 - MAINTENANCE: D - EVERY 500 HOURS SERVICE).
- Refit and set the tension in - Refit and set the tension in the drive belts (see: 3 - the drive belts (see: 3 - MAINTENANCE: C - EVERY 250 HOURS SERVICE).MAINTENANCE: C - EVERY 250 HOURS SERVICE).
- Turn the I.C. engine using the starter, to allow the oil pressure to rise.- Turn the I.C. engine using the starter, to allow the oil pressure to rise.
- Reconnect the engine cut-off solenoid.- Reconnect the engine cut-off solenoid.
- Lubricate the lift truck completely (see: 3 - MAINTENANCE: SERVICING SCHEDULE).- Lubricate the lift truck completely (see: 3 - MAINTENANCE: SERVICING SCHEDULE).
Make sure the area is adequately ventilated before starting Make sure the area is adequately ventilated before starting up the lift truck.up the lift truck.
- Start up the lift truck, following the safety instructions and regulations (see: OPERATING INSTRUCTIONS UNLADEN AND LADEN).- Start up the lift truck, following the safety instructions and regulations (see: OPERATING INSTRUCTIONS UNLADEN AND LADEN).
- Run all the jib’s hydraulic - Run all the jib’s hydraulic movements, concentrating on the ends of travel for each cylimovements, concentrating on the ends of travel for each cylinder.nder.
https://www.forkliftpdfmanuals.com/

Manitou MLT 845 120 LSU 3-E3 Series Specifications

General

Brand	Manitou
Model	MLT 845 120 LSU 3-E3 Series
Category	Forklifts
Language	English