1 25
1 25
WELDINGWELDING
- Disconnect the battery before any welding operations on the lift truck.- Disconnect the battery before any welding operations on the lift truck.
-- When carrWhen carrying out electric welding work on ying out electric welding work on the lift truck, connect the negative the lift truck, connect the negative cable from the equipment directly to cable from the equipment directly to the part beingthe part being
welded, so as to avoid high tension current passing through the alternator.welded, so as to avoid high tension current passing through the alternator.
-- Never carrNever carry out welding or work y out welding or work which gives off heat on an asswhich gives off heat on an assembled tyre. The heat embled tyre. The heat would increase the pressure would increase the pressure which couldwhich could
cause the tyre to explode.cause the tyre to explode.
-- If the lift truck is equipped with an electronic control unit, disconnect this before starting to weld, to avoid the risk of causingIf the lift truck is equipped with an electronic control unit, disconnect this before starting to weld, to avoid the risk of causing
irreparable damage to electronic components.irreparable damage to electronic components.
WASHING THE LIFT TRUCKWASHING THE LIFT TRUCK
- Clean the lift truck or at least the area concerned before any intervention.- Clean the lift truck or at least the area concerned before any intervention.
- Remember to close and lock al- Remember to close and lock all accesses to the lift trl accesses to the lift truck (doors, windows, cowls…).uck (doors, windows, cowls…).
- During washing, avoid the articulations and electrical components and connections.- During washing, avoid the articulations and electrical components and connections.
-- If necessary, protect against penetration of waterIf necessary, protect against penetration of water, steam or cleaning agents, components sus, steam or cleaning agents, components susceptible of being damaged,ceptible of being damaged,
particularly electrical components and connections and the injection pump.particularly electrical components and connections and the injection pump.
- Clean the lift truck of any fuel, oil or grease trace.- Clean the lift truck of any fuel, oil or grease trace.
FOR ANY INTERVENTION OTHER THAN REGULAR MAINTENANCE, CONSULT YOUR DEALER.FOR ANY INTERVENTION OTHER THAN REGULAR MAINTENANCE, CONSULT YOUR DEALER.
To Next Page
Loading...
Need help?
General