Manitou MLT 845 120 LSU 3-E3 Series User Manual


1-12
1-12
H - DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAYH - DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAY
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
- Operators driving on the public highway must comply with current highway code legislation.- Operators driving on the public highway must comply with current highway code legislation.
-- The lift truck must comply with current road legislation. If necessary, theThe lift truck must comply with current road legislation. If necessary, there are optional solutions. Contact youre are optional solutions. Contact your dealer.r dealer.
INSTRUCTIONSINSTRUCTIONS
- Make sure the revolving light is in place, switch it on and verify its operation.- Make sure the revolving light is in place, switch it on and verify its operation.
- Make sure the li- Make sure the lights, indicators and windscreen wipers are working ghts, indicators and windscreen wipers are working properly.properly.
- Switch off the working headlights if the lift truck is fitted with them.- Switch off the working headlights if the lift truck is fitted with them.
-- Select the steering mode “HIGHWASelect the steering mode “HIGHWAY TRAFFIC” (as model of lift truck) (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS)Y TRAFFIC” (as model of lift truck) (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS)..
- Retract entirely the jib and p- Retract entirely the jib and put the attachment at 300ut the attachment at 300 mm from the ground.mm from the ground.
-- Place the slope correctors in the central position, i.e. the transverse shaft of the axles parallel to the chassis (aPlace the slope correctors in the central position, i.e. the transverse shaft of the axles parallel to the chassis (as model of lift truck).s model of lift truck).
- Lift up the stabilizers to the maximum and turn the blocks inwards (as model of lift truck).- Lift up the stabilizers to the maximum and turn the blocks inwards (as model of lift truck).
-- For lift trucks wiFor lift trucks with gearbth gearboxes:oxes:
On the road, set off in 3rd gear and go into 4th (as model of lift truck) when the conditions and state of the road allow. In hilly areas,On the road, set off in 3rd gear and go into 4th (as model of lift truck) when the conditions and state of the road allow. In hilly areas,
set off in 2nd gear and go into 3rd when the conditions and state of the road allow.set off in 2nd gear and go into 3rd when the conditions and state of the road allow.
Never move in neutral (forward/reverse selector or Never move in neutral (forward/reverse selector or gear lever in neutral or gear lever in neutral or transmission cut-off button pressed) to preserve the lift transmission cut-off button pressed) to preserve the lift truck engine brake.truck engine brake.
Failure to respect this instruction on a slope will lead to excessive speed which may make the lift truck uncontrollable (steering, brakes) and causeFailure to respect this instruction on a slope will lead to excessive speed which may make the lift truck uncontrollable (steering, brakes) and cause
serious mechanical damage.serious mechanical damage.
https://www.forkliftpdfmanuals.com/

Manitou MLT 845 120 LSU 3-E3 Series Specifications

General

Brand	Manitou
Model	MLT 845 120 LSU 3-E3 Series
Category	Forklifts
Language	English