Manitou MLT 845 120 LSU 3-E3 Series - Page 71

2-382-38

12 - JIB HEAD ELECTROVALVE
12 - JIB HEAD ELECTROVALVE
Enables use of two hydraulic functions on the Enables use of two hydraulic functions on the attachment circuit.attachment circuit.
To make connection of the rapid connectors easierTo make connection of the rapid connectors easier, decompress the hydraulic circuit , decompress the hydraulic circuit by pressing buttonby pressing button
1 on the electrovalve.1 on the electrovalve.
OPERATIONOPERATION
- With button 1 not - With button 1 not engaged, button 2 controls a hydraulic function.engaged, button 2 controls a hydraulic function.
- Hold button 1 down, button - Hold button 1 down, button 2 controls another hydraulic function.2 controls another hydraulic function.
NOTE:NOTE: Switch 3 enables the hydraulic fuSwitch 3 enables the hydraulic function controlled by button 1 to be locked. nction controlled by button 1 to be locked. IndicatorIndicator
4 lights up to show when it is in use.4 lights up to show when it is in use.
13 - JIB HEAD ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING13 - JIB HEAD ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING
The addition of these two options enables the combining of several hydraulic functions.The addition of these two options enables the combining of several hydraulic functions.
OPERATIONOPERATION
-- Button 1 not Button 1 not engaged, button engaged, button 2 controls a hydr2 controls a hydraulic function.aulic function.
-- Hold button 1 dHold button 1 down, button 2 own, button 2 controls another hydraucontrols another hydraulic function.lic function.
NOTE:NOTE: Switch 3 enables the hydraulic fuSwitch 3 enables the hydraulic function controlled by button 1 to be locked. nction controlled by button 1 to be locked. IndicatorIndicator
4 lights up to show when it is in use.4 lights up to show when it is in use.
11
11
22
11
22
44
33
44
33
https://www.forkliftpdfmanuals.com/