Manitou MSI 40 - Page 77

3 - 7
D - EVERY 400 WORKING HOURS SERVICE
To be carried out once a year if the lift truck has not reached the 400 hours service in the year.
D1 - Drain and change the engine oil.
D2 - Change the engine oil filter.
D3 - Change the dry air filter cartridge.
D4 - Change the fuel filter cartridge.
D5 - Change the hydraulic return oil filter cartridge.
D6 - Change the oil tank breather.
D7 - Check the density of the battery electrolyte.
D8 - Clean the fuel lift pump.
D9 - Check, clean and lubricate the mast lifting chains.
D10- Grease the parking brake lever mechanism.
D11- Check the wear of the forks (*).
(*) : (Consult your dealer)
E - EVERY 800 WORKING HOURS SERVICE
To be carried out once a year if the lift truck has not reached the 800 hours service in the year.
E1 - Drain and change the hydraulic oil.
E2 - Clean the suction strainer of the hydraulic oil tank.
E3 - Change the hydrostatic transmission oil filter cartridge.
E4 - Drain and change the transfer box oil.
E5 - Drain and change the oil of the front axle differential.
E6 - Drain and change the oil of the front wheel reducers.
E7 - Drain and change the cooling liquid.
E8 - Drain and clean the fuel tank.
E9 - Change the safety dry air filter cartridge.
E10- Clean the heating suction filter.
E11- Check the brake circuit pressure (*).
E12- Bleed the brake circuit (*).
E13- Check the brake adjustment (*).
E14- Change the braking oil (*).
E15- Check the engine silentblocs (*).
E16- Check the engine speeds (*).
E17- Check the attachment carriage (*).
E18- Check the condition of the wheels and tyres (*).
E19- Check the speeds of the hydraulic movements (*).
E20- Check the condition of the attachments (*).
E21- Clean the hydraulic pump tubular filter (*).
(*) : (Consult your dealer)
F - EVERY 2400 WORKING HOURS SERVICE
F1 - Check the hydraulic circuit pressures and discharge rates (*).
F2 - Check the hydrostatic transmission circuit pressures (*).
F3 - Check and adjust the governing start r.p.m. of the hydrostatic transmission (*).
F4 - Check the chain roller wear (*).
F5 - Check the mast guide rolls (*).
F6 - Check the mast bearing rollers (*).
F7 - Check the mast lifting chains (*).
3 - 20
3 - 20
3 - 21
3 - 21
3 - 22
3 - 22
3 - 22
3 - 23
3 - 23
3 - 23
3 - 24
3 - 24
3 - 24
3 - 25
3 - 26
3 - 26
3 - 27
3 - 28
3 - 28
3 - 29