EasyManua.ls Logo

Manitou MSI 40 - Page 78

Manitou MSI 40
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 - 8
F8 - Check the steering system (*).
F9 - Clean the hydraulic oil tank (*).
F10 - Check the oscillation of the rear axle (*).
F11 - Check and adjust the valves clearances (*).
F12 - Check the injectors (*).
F13 - Check and scale the radiator (*).
F14 - Check the water pump and the thermostat (*).
F15 - Check the condition of the mast assembly (*).
(*) : (Consult your dealer)
G - EVERY 4800 WORKING HOURS SERVICE
G1 - Check the wear of the brake disks (*).
G2 - Check the steering axle (*).
G3 - Check the clearance of the front wheel reducers (*).
G4 - Check the bearings clearance of the transfer box (*).
G5 - Check the alternator and the starter motor (*).
(*) : (Consult your dealer)
H - OCCASIONAL MAINTENANCE
H1 - Bleed the fuel system.
H2 - Change a wheel.
H3 - Tow the lift truck.
H4 - Sling the lift truck.
H5 - Transport the lift truck on a flat semitrailer.
H6 - Lift the cabin in case of electric failure.
H7 - Lift the cabin in the event of an hydraulic failure in the lifting system.
H8 - Lift the cabin in the event of a mechanical failure in the lifting system.
3 - 30
3 - 32
3 - 33
3 - 34
3 - 35
3 - 36
3 - 37
3 - 38

Table of Contents

Related product manuals