Manitou MT-X 625 2-E3 Series User Manual

2-22
ERROR CODES
The appearance of the maintenance key
on the hour meter screen together with the sounding of an audible beep,
indicate that an anomaly has been detected by one of the lift truck's Electronic Control Units (ECU).
- Press the button
to display the information on the upper screen and error code .
- If there are several error codes, press the button
to loop through the error codes.
- Press the button
once more to return to the hour meter screen, the maintenance key remains displayed as long the as the required
repairs have not been carried out.
- Contact your dealer, stating the error code or codes.
NOTE: A faulty fuse can generate several error codes. When "error codes" and "maintenance interval" are displayed together, the maintenance
reminder time will appear at the end of the list.
ERROR CODE HYDROSTATIC TRANSMISSION
520201 Hydraulic transmission electronic control unit voltage fault.
520214 Hydraulic transmission electronic control unit fault.
520215 Hydrostatic motor regulator control fault.
520217 Stop light control fault.
520224 Hydrostatic motor operating solenoid valve control fault.
520225 Hydraulic transmission electronic control unit fault.
520226 Hydraulic transmission electronic control unit fault.
520227 Hydraulic transmission electronic control unit fault.
520273 Forward/reverse selector error.
520274 Inching sensor error.
520275 Hydrostatic pump reverse operation control fault.
520276 Hydrostatic pump forward operation control fault.
520277 Hydraulic pump speed sensor fault.
520281 Temperature outside operating range.
ERROR CODE MAN-MACHINE INTERFACE
190 Engine speed data fault.
520400 Network link fault.
520401 Fuel gauge fault.
520402 Engine temperature sensor fault.
520404 Man-Machine Interface fault.
520405 Man-Machine Interface fault.
520406 Man-Machine Interface fault.
520407 Man-Machine Interface fault.
520408 Man-Machine Interface fault.
520409 Man-Machine Interface fault.
520410 Man-Machine Interface fault.
520411 Man-Machine Interface fault.
520412 Hydrostatic transmission network link fault.
520413 Electronic handling controller network connection fault.
ERROR CODE TELESCOPE/ATTACHMENT
2662 Telescope control setting fault.
2663 Attachment control setting fault.
520300 Seat sensor fault.
520307 Proportional telescope control fault.
520310 Proportional attachment control fault.
520315 Telescope control ON/OFF fault.
520318 Attachment control ON/OFF fault.
520336 Electronic handling controller fault.
520337 Electronic handling controller fault.
520338 Electronic handling controller temperature fault.
520352 Attachment forced operation control fault.
520362 Electronic handling controller 10V output fault.
520363 Attachment forced operation indicator fault.
520364 Attachment hydraulic control button fault.
520365 Attachment easy hydraulic connection button.
520366 Solenoid valve on jib head fault.
520370 Telescope retracted sensor fault (fault detected during test).
520371 Electronic handling controller temperature fault.
520376 Stability indicator fault.
520382 Aggravating hydraulic movement cut-off disable fault
520383 Computer earth output fault.
520384 Telescope retracted senor fault.
520386 Jib angle sensor fault.
520387 Strain gauge fault.
520388 Network communication fault.
520391 Inclination cut-off valve fault.
520392 Angle calibration fault (fault detected during test).
520393 Gauge calibration fault (fault detected during test).
520394 Safety valve fault.
520395 Safety valve cut-off fault (fault detected during test).
520396 Lowering regulating valve fault.
520397 Regulating fault (fault detected during test).
520398 Raising regulating valve fault.
647421 (22/08/2017) MT-X 625 Série 2-E3 + COMFORT

Manitou MT-X 625 2-E3 Series Specifications

General

Brand	Manitou
Model	MT-X 625 2-E3 Series
Category	Forklifts
Language	English