5
R8 PRO SERVICE GUIDE
Below is a list of tools necessary for changing the travel on the R8 Pro forks:
• Safety Glasses
• Nitrile Gloves
• Lint-Free Rags
• Torque Wrench (6-220 in-lb [0.7-25 Nm])
• 2mm Hex Wrench
• 8mm Hex Wrench
• 14mm Box End Wrench
• Shock Pump
• Cassette Lockring tool* (e.g. Park tool FR-5.2)
• 8mm Socket *
• 24mm Socket *
• 24mm Box End Wrench
• (Optional, replaces items above with*) Manitou Tool Kit - Manitou part number 172-31133 (This includes the Manitou Cassette Tool, 8mm
thin wall socket, and flat ground 24mm socket)
• Travel Spacer Kit 141-36713-K032
Below is a list of additional tools necessary for a full service of the R8 Pro forks:
• 2.5mm Hex Wrench
• 5mm Hex Wrench
• 11mm Socket (Manual Knob Only)
• Plastic or non-marring pick
• Downhill tire lever or flat blade screwdriver
• 3wt Maxima Fork oil (141-34078-K016)
• Semi-bath Oil, 5/40w Synthetic - Manitou part number 85-0022
• Slickoleum™ Grease
• Isopropyl Alcohol
• 34mm Seal Install Tool 172-37540-K002
• Cartridge Damper Bleed Kit 141-30694-K020 (Pro Only)
• 34mm Seal Kit 141-39022-K020
• Air Piston Seal Kit 141-32155-K012
REQUIRED TOOLS
To Next Page