2 For your safety
Repair Manual C4 18
2.4 Safety devices
Meaning
The combi steamer has a number of safety devices to protect the user from hazards. It is absolutely
essential that all safety devices are fitted and in working order when operating the combi steamer.
Position and function
The figure below shows a size 20.20 combi steamer as an example for all appliance sizes:
Item Safety device Function Check
1 Cover can only be re-
moved using tool
Prevents live parts from being
touched accidentally
Prevents access to the moving
fan from the wiring compartment
Check that the cover is in place
2 Operating panel can only
be removed using a tool
Prevents live parts from being
touched accidentally
Ensure that the operating panel is
in place
3
Appliance door
Protects the user and outside
environment from hot steam
Check the door pane regularly for
scratches, cracks, indentations etc.
and replace it if any are found
4 On-latch position of
appliance door
Prevents scalding of user's face
and hands from escaping steam
When appliance is at low temper-
ature, check door positions as
described in 'Opening and closing
the appliance door safely' in the
user manual
5 Suction panel in cooking
chamber; can only be
removed using a tool
Prevents access to the moving fan
and ensures good heat distribution
See 'Removing and fitting the
suction panel' in the user manual
for further details
6 For floor-standing units:
built-in
preheat bridge in appli-
Prevents scalding from escaping
steam when the loading trolley is
not in the appliance during pre-
To Next Page
Loading...
