3 Replacing appliance parts to rectify problems
Repair Manual C4 71
3.
Use the fan removal tool to force the fan wheel off the motor shaft.
The fan wheel comes off with a loud bang.
If the fan wheel will not come off, you can heat the fan-wheel boss
or tap the shaft of the removal tool gently.
4.
Disconnect the motor connector in the motor supply line.
5. Unscrew the four M8 hex nuts of the motor using a 13mm wrench
or socket wrench.
6.
Take the motor off from the back.
When removing the motor, take care not to damage the seals
6.a EB 6.10:
Take care when removing the motor not to damage the dual-level
sensor.
To Next Page
Loading...
