MAINTENANCE AND LUBRICATION GRT880 SERVICE MANUAL
9-2
Published 10/19/2017, Control # 618-00
LUBRICANTS AND LUBRICATION
INTERVALS
The service intervals specified are for normal operation
where moderate temperature, humidity, and atmospheric
conditions prevail. In areas of extreme conditions, the
service periods and lubrication specifications should be
altered to meet existing conditions.
NOTE: All fluids and lubricants may be purchased by
contacting an authorized Manitowoc distributor or
Manitowoc Crane Care Parts Department.
CAUTION
Possible Equipment Damage!
Chassis grease lubricants must not be applied with air
pressure devices as this lubricant is used on sealed
fittings.
The multipurpose grease applied during manufacturing is
of a lithium base. Use of a non-compatible grease could
result in damage to equipment.
Reference Only