Need help?Do you have a question about the Maple Armor FW106 and is the answer not in the manual?
Details Underwriters Laboratories (UL/ULC) listings and approvals for the control panel.
General requirements for all installations of the control panel and its components.
Specific requirements for local protected fire alarm systems.
Description of the FW106/FW106C intelligent Fire Alarm Control Panel for facilities.
Overview of the system components and their functions.
Important safety precautions to follow during installation.
Guidelines for selecting an appropriate location for the control panel.
Notices and considerations for securely mounting the control panel cabinet.
Instructions for preparing the enclosure by removing conduit entry points.
Notes and standards to follow for basic system wiring and detector placement.
Guidelines for maintaining separation between power-limited and non-power-limited wiring.
Instructions on how power-limited and non-power-limited wiring enters the enclosure.
Instructions for wiring the AC supply to the control panel's power supply.
Diagram and explanation for Class A addressable loop circuit wiring.
Diagram for Class A notification appliance circuit wiring.
Diagram for Class B external network circuit wiring.
Information about configuring the XNU jumper for network connections.
Pre-power checks to ensure correct wiring and component setup.
Step-by-step procedure for powering up the control panel.
Troubleshooting steps for circuit-related issues.
Procedure for identifying and correcting ground faults.
Troubleshooting steps for battery-related issues.
Common trouble indicators and their potential causes.
Describes panel responses in standby, alarm, trouble, and supervisory conditions.
Description of the system's normal standby operational state.
Details on how notification appliance circuits are activated and silenced.
System checks for device type and address, reporting configuration issues.
How the panel monitors detector status and triggers alarms or troubles.
Explanation of the function and meaning of each LED indicator.
Configuring the control panel using PC software and an Ethernet port.
Levels of security and access control for configuration and maintenance functions.
View real-time events on the LCD.
Browse events, acknowledge alarms, silence devices, reset system.
Includes Level 1 functions plus setting system time/date, bypassing devices/NACs.
Includes Level 2 functions plus firmware update, user management, system settings.
List of compatible devices for addressable loop circuits.
List of compatible appliances for notification appliance circuits.
Guide for selecting appropriate wire for SLC circuits based on current and distance.
Calculations for total system currents for battery sizing.
Calculations for determining the required battery capacity.
General| Brand | Maple Armor |
|---|---|
| Model | FW106 |
| Category | Control Panel |
| Language | English |
To Next Page
