Marantz PM-KI RUBY - Adjusting the Volume Balance (LEVEL) and Sound Quality; Treble)

Adjusting the volume balance (LEVEL) and sound quality (BASS/TREBLE)
n
Adjusting LEVEL
The volume level of the left and right channels can be
trimmed in 0.5 dB steps across a 0.0 - -9.0 dB range.
The factory default setting is 0.0 dB (maximum).
1
Press MODE/TRIM.
The unit enters LEVEL adjustment mode.
0
If the slave (v
p. 10) is connected by F.C.B.S., the
device for to adjust the volume balance (LEVEL) and
sound quality (BASS/TREBLE) can be switched by
pressing this button.
2
Press o p to select the channel that you wish
to configure (L or R).
The level value of the selected channel flashes.
3
Use ui to adjust the volume.
0
If there is no operation for 15 seconds, the setting is
committed and the unit returns to the standard display.
4
Press ENTER.
This exits LEVEL adjustment mode and enters BASS
adjustment mode. Follow steps 3 onward of “Adjusting
BASS” to adjust the bass.
n
Adjusting BASS
The bass volume can be adjusted in 1 dB steps across a
-6 - +6 dB range. The factory default setting is 0 dB.
1
Press MODE/TRIM.
The unit enters LEVEL adjustment mode.
2
Press ENTER to select “BASS”.
The unit enters BASS adjustment mode.
3
Press ui to adjust the bass volume.
0
If there is no operation for 15 seconds, the setting is
committed and the unit returns to the standard display.
4
Press ENTER.
This exits BASS adjustment mode and enters TREBLE
adjustment mode. Follow steps 3 onward of “Adjusting
TREBLE” to adjust the treble.
0
Settings are not applied when tone control is turned off.
Press TONE to turn on tone control (TONE indicator
lights).
n
Adjusting TREBLE
The treble volume can be adjusted in 1 dB steps across a
-6 - +6 dB range. The factory default setting is 0 dB.
1
Press MODE/TRIM.
The unit enters LEVEL adjustment mode.
2
Press ENTER twice to select “TREBLE”.
The unit enters TREBLE adjustment mode.
3
Press ui to adjust the treble volume.
0
If there is no operation for 15 seconds, the setting is
committed and the unit returns to the standard display.
4
Press ENTER.
This exits TREBLE adjustment mode and returns to the
normal display.
0
Settings are not applied when tone control is turned off.
Press TONE to turn on tone control (TONE indicator
lights).
ENGLISH
17
PrintingColor:Black