Marantz PM-KI RUBY User Manual

Remote control unit
The supplied remote control can be used to control a Marantz
CD player in addition to this unit.
0
“CD player operations” (v p. 7)
n
Operating this unit
To operate amplifier, press REMOTE MODE AMP button
to switch the remote control to the amplifier operation
mode.
.
t
r
e
w
u
y
i
o
Q1
Q2
Q0
q
A
Remote control signal transmitter
This transmits signals from the remote control unit.
(v p. 2)
B
Cursor buttons (uio p)
These select items.
C
DISPLAY button
Each press of this switches the brightness of the display.
Press and hold to turn the illumination lamp on/off.
D
Input source select buttons (INPUT df)
This selects the input source. (v
p. 16)
E
Power operation button (X AMP)
This turns the power on/off (standby).
(v p. 16)
F
Remote mode select button
(REMOTE MODE AMP)
This switches the remote control to amplifier control mode.
G
ENTER button
This determines the selection.
H
SETUP button
This displays the setting menu on the display.
(v p. 19)
I
MODE/TRIM button
This displays the volume balance adjustment menu on the
display. (v p. 17)
J
TONE button
Turns the tone control function on/off.
(v p. 17)
K
VOLUME buttons (df)
These adjust the volume level. (v p. 16)
L
MUTE button
This mutes the output audio. (v p. 16)
ENGLISH
6
Overview Connections Playback Settings Tips Appendix
PrintingColor:Black

Marantz PM-KI RUBY Specifications

General

Type	Integrated Amplifier
Signal to Noise Ratio MC	75 dB
Damping Factor	100
Dimensions	440 x 127 x 453 mm
Frequency Response	5Hz - 50kHz
Total Harmonic Distortion	0.005%
Input Sensitivity MM	2.5 mV / 47 kohm
Input Sensitivity	200 mV / 22 kohm