Specifications
0
RMS Power output (Simultaneous drive of both channels) : 100 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %)
200 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %)
0
Total harmonic distortion
(1 kHz, simultaneous drive of both channels, 100 W, 8
Ω/ohms load) :
0.005 %
0
Frequency response (CD, 1 W, 8
Ω/ohms load) : 5 Hz – 50 kHz ±3 dB
0
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : 500
0
Input sensitivity/Input impedance
PHONO (MC) :
250 μ
V / 100 Ω/ohms
PHONO (MM) :
2.3 mV/39 k
Ω/kohms
CD/LINE/RECORDER :
220 mV/13 kΩ/kohms
POWER AMP :
1.1 V/13 kΩ/kohms
0
Maximum allowable PHONO input level (1 kHz)
MC :
8 mV
MM :
80 mV
0
RIAA deviation (20 Hz – 20 kHz) : ±0.5 dB
0
S/N (IHF-A, 8 Ω
/ohms load)
PHONO (MC) :
75 dB (0.5 mV Input)
PHONO (MM) :
88 dB (5 mV Input)
CD/LINE/RECORDER :
107 dB (Rated output)
0
Tone Control
BASS (50 Hz) :
±6 dB
TREBLE (20 kHz) :
±6 dB
0
Power supply : AC 120 V, 60 Hz
0
Power consumption : 130 W
0
Power consumption in standby mode : 0.2 W
For the purpose of improvement, the specifications and design are subject to change without notice.
.
Product Name : Integrated Amplifier
Model Number : PM-KI RUBY
ENGLISH
27
To Next Page
Loading...
