Why won't my Marantz CD Player turn on with the remote's X CD button?
If the Marantz CD Player doesn't turn on when pressing the remote's X CD button, press the unit's power operation switch. Alternatively, press the unit's power switch first, then press the remote's X CD button.
How do I switch the sound mode on a Marantz CD Player SA-CD hybrid disc?
To switch the sound mode on an SA-CD hybrid disc, change the Start Sound Mode setting to Super Audio CD.
Identifies and explains the buttons and ports on the front of the unit.
Guidance on selecting and connecting audio and data cables.
Instructions for unbalanced analog audio hookups.
Instructions for balanced analog audio hookups.
How to connect digital audio sources via optical or coaxial cables.
Steps for connecting an iPod for playback and control.
General| Type | SACD/CD Player |
|---|---|
| Disc Formats | SACD, CD, CD-R/RW |
| Frequency Response (SACD) | 2 Hz - 50 kHz |
| Frequency Response (CD) | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio (SACD) | 110 dB |
| Signal-to-Noise Ratio (CD) | 110 dB |
| Digital Outputs | Coaxial, Optical |
| Analog Outputs | XLR, RCA |
| Headphone Output | Yes |
| Weight | 14.5 kg |
| Dynamic Range (SACD) | 110 dB |
| Dynamic Range (CD) | 100 dB |
| Power Consumption | 30 W |
| Total Harmonic Distortion (SACD) | 0.0009% |
| Output Level/Voltage | 2.2V |
| Dimensions (W x H x D) | 440 x 129 x 406 mm |
| Digital-to-Analog Converter | CS4398 |
To Next Page
