EasyManua.ls Logo

Marantz SR 8015 - Page 10

Marantz SR 8015
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby speaker. It can also be selected when the “Speaker Virtualizer” setting is turned “On”.
2 The default sound mode for the AirPlay playback is “Direct”.
3 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
4 This item can be selected if the Auro-3D signal contains Dolby TrueHD.
5 This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
6 This item can be selected when surround back speakers are used.
7 This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.
8 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
10 Selectable when “Surround Parameter” - “IMAX” is set to “Auto” in the menu.
11 Selectable when “Surround Parameter” - “IMAX” is set to “On” in the menu and a 48 kHz sampling frequency DTS 5.1 channel signal is being input.
12 Selectable when “Surround Parameter” - “IMAX” is set to “Off”. (Selectable sound modes vary depending on the type of input signal).
13 This item can be selected when the input signal is DTS-HD Master Audio.
14 This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.
15 This item can be selected when the input signal is DTS-HD Hi Resolution.
16 This item can be selected when the input signal is DTS 96/24.
17 This item cannot be selected if the sampling frequency of the input signal is 32 kHz.
18 This item can be selected if the Auro-3D signal contains Multi Channel PCM.
19 This item can be selected when the input signals contain surround back signals.
20 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
21 This item can be selected when input signal is MPEG-2 AAC
22 This item can be selected when input signal is MPEG-4 AAC
10
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating

Related product manuals