NAMES AND
FUNCTIONS
53
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
ADVANCED
OPERATION
ENGLISH
ADVANCED OPERATION
SEARCH MODE
You can search for the channel you want to listen to
using one of three search modes. You can also enter
the number directly to select the desired channel.
ALL CHANNEL SEARCH MODE
1. 2.3.
2.
1.
3.
(Using the unit)
1. Turn the INPUT SELECTOR knob to select
“TUNER”.
2. Press the BAND button to select SIRIUS
band.
3. Press the 3 or 4 cursor button on the front
panel to select the desired channel.
(Using the remote controller)
1. To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2. Press the BAND button to select SIRIUS
band.
3. Press and hold the 3 or 4 cursor button.
PRESET SEARCH MODE
1. 2.3.
1.
2.
3.
(Using the unit)
1. Turn the INPUT SELECTOR knob to select
“TUNER”.
2. Press the BAND button to select SIRIUS
band.
3. Press the 1 or 2 cursor button on the front
panel to select the desired preset channel.
(Using the remote controller)
1. To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2. Press the BAND button to select SIRIUS
band.
3. 1 or 2 cursor button to tune in the desired
preset channel.
Or enter the preset channel number with
the numeric buttons.
CATEGORY SEARCH MODE
You can select the desired channel from the category
allocated to each channel.
Category being aired can be only selected.
1. 2.4.3.6. 5.
1.
2.
4.
5.
3.
(Using the unit)
1. Turn the INPUT SELECTOR knob to select
“TUNER”.
2. Press the BAND button to select SIRIUS
band.
3. Press the ENTER button on the front panel.
4. Press the 1 or 2 button on the front panel to
select the desired category.
5. After selecting the category, Press the 3
or 4 cursor button to select the desired
channel of the category.
6. You can return to the normal mode by
press the ENTER button during Category
Search Mode.
(Using the remote controller)
1. To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2. Press the BAND button to select SIRIUS
band.
3. Press the CATEGORY + or − button.
4. After selecting the category, press the 3
or 4 cursor button to select the desired
channel of the category.
5. You can return to the normal mode by
press the ENTER button during Category
Search Mode.
Note
• Category search ends automatically about 10
seconds after the last operation.
To Next Page
Loading...
