Marathon Electric DVR 2000E+ - Page 53

51
• Metering Message Time is the amount of
time between the transmission of messages
in the metering group.
• Control Message Time is the amount of time
between the transmission of messages in the
control group.
• Generator Status Message Time is the
amount of time between the transmission of
messages in the generator status group.
• Regulator Status Message Time is the
amount of time between the transmission of
messages in the regulator status group.
• Message Timeout Time is the amount of
time before a Loss of Communication alarm
istriggered.Thecheckboxpermitsenabling/
disabling of this feature.
CAN Priorities (6b)
This panel has pull-down menus for assigning the
priorities to the message groups transmitted by the
DVR
®
.
• Meter Priority is the priority given to mes-
sages in the metering group.
• Control Priority is the priority given to mes-
sages in the control group.
• Generator Status Priority is the priority
given to messages in the generator status
group.
• Regulator Status Priority is the priority given
to messages in the regulator status group.
7
DVRPortal
™
Graphical User Interface (GUI)
GPN046 04-13.indd 51 4/5/13 10:24 AM