MAREX 375
18
by Nikl Design USER MANUAL
➢ The gas bottle is located in the bathing platform bench storage. The compartment
where the gas bottle is kept is drained out under the bathing ladder cover.
Picture 7: Gas bottle storage with the pressure reduction valve (1)
The pressure reduction valve must never come in contact with saltwater; when it
does, it will start to corrode. If any corrosion is seen it must be changed before
you use the gas system. The pressure reduction valve must be controlled often
and should be replaced every year.
The gas closing valve is located on aft deck in the small bench.
Picture 8: Gas closing valve for cooker and oven (1)
To Next Page
Loading...
