EasyManua.ls Logo

MAREX 375 - Through Hull Leads - under the Waterline; Closing Valve - Seawater Inlet for the Toilet System

Default Icon
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAREX 375
23
by Nikl Design USER MANUAL
CAUTION
Make sure that the fuel lines are always intact. The pipe should not be extremely
bended, close to corners or any other sharp areas.
Exit the boat for filling fuel.
Do not overfill the tank. Carefully measure the proper amount of diesel when
refuelling. Leave some space in the tank to avoid spillage during normal motion
of the boat.
When refuelling, check if the fuel line has an automatic stopping device.
Ensure that no fuel is discharged over the side or into any part of the boat.
Regularly check that all fuel line connectors are tight.
(F) DANGER
When refuelling the tank, do not smoke. It is dangerous!
3.8 THROUGH HULL LEADS - UNDER THE WATERLINE
3.8.1 CLOSING VALVE SEAWATER INLET FOR THE TOILET
SYSTEM
The seawater inlet closing valve for the automatic toilet (optional) is placed under the
hallway floor in the front cabin area.
Picture 10: Location of the seawater inlet for toilet flushing (1)
DANGER:
Close the septic tank outlet BEFORE cleaning the seawater filter for the toilet.
1

Table of Contents

Related product manuals