MAREX 375
71
by Nikl Design USER MANUAL
✓ Check the steering function before the boat is placed on water.
7.4 OTHER EQUIPMENT
✓ Cleaning the canopy: See the supplier’s manual in divider number 4.
✓ Clean all textiles according to the manuals.
7.5 REMOVING RUST/CORROSION
The only steel usable for boat is acid proof stainless steel AISI 316 L. Bolts, screws and
other stainless steel parts are made from A4 quality stainless steel.
Stainless steel is not maintenance free and should be polished together with the boat.
Use a soft tissue and a small brush like a toothbrush to remove dust. DO NOT USE
RUBBING materials on stainless steel.
Rust marks on screw-heads, rails, cleats or especially on anchors are normal. It is not
rust or corrosion but discoloration. This comes from mounting tools, dust, iron particles
and similar. This discoloration can easily be removed by polishing with “autosol Wurth”
or other similar polishing liquids.
To Next Page
Loading...
