MAREX 375
33
by Nikl Design USER MANUAL
Picture 18: The automatic lensing system in the engine room (1)
▪ The automatic lensing is connected to a switch on the dashboard.
Picture 19: Lensing lamp indicators (1)
▪ System is operating in automatic mode.
▪ Press and hold switch to run lensing pump manually.
▪ If pump is working automatically or the switch is pressed, then alarm will sound.
Possible faults:
• The automatic fuse placed in the main switch panel must be reset (20 amp) and
the red light has stopped illuminating.
• The pump inlet is blocked. This may also happen to a manual pump.
To Next Page
Loading...
