MAREX 375
37
by Nikl Design USER MANUAL
Picture 25: Black water level indicator (1) - optional
(In combination with electrical discharge)
Picture 26: Septic/Black water tank in the engine room (1),
Macerator pump - optional (2)
Possible errors that may stop or block the discharge:
❖ No water inside the toilet bowl:
• Blocked inlet for the water into the toilet (plastic pieces, seaweed etc.).
• Filled filter for the toilet pump.
• No power on septic flushing pump. Automatic fuse for the septic pump
must be reset. It is located in the fuse panel on the starboard side (25
A), marked “TOILET”. The red light in the panel will be ON if the circuit
is broken.
• No power to the toilet. The fuse has to be reset.
To Next Page
Loading...
