Mariner 150 OPTIMAX User Manual

OIL INJECTION
Page 3C-8 90-855347R1 JANUARY 1999
18. Install new check valve/hose assemblies on cylinders #1, #3 and #5. Secure all hose
connections with sta-straps.
57411
a
b
c
a-#1 Cylinder Check Valve/Hose Assembly
b-#3 Cylinder Check Valve/Hose Assembly
c-#5 Cylinder Check Valve/Hose Assembly
19. Reinstall starter motor. Torque bolts to 17.5 lb ft. (23.5 Nm).
20. Reinstall starter solenoid/trim relay plate. Torque bolts to 150 lb. in. (17 Nm).
21. Reinstall ECM. Torque bolts to 70 lb. in. (8 Nm).
57412
a
b
b
c
c
c
a-Torque bolts to 17.5 lb ft. (23.5 Nm)
b-Torque bolts to 150 lb. in. (17 Nm)
c-Torque bolts to 70 lb. in. (8 Nm)
22. Reinstall bottom cowling.
23. Reinstall flywheel cover.

Mariner 150 OPTIMAX Specifications

General

Brand	Mariner
Model	150 OPTIMAX
Category	Outboard Motor
Language	English