Model ESM301 / ESM301L Test Stand User’s Guide
26
generate a request code on the display, as shown below:
The request code must be supplied to Mark-10 or a distributor, who will then provide a corresponding
authorization code to activate the function.
The process for entering the authorization code is as follows:
1. The first digit of the request code will be flashing. Press + to increment the digit. Pressing +
when the number 9 is displayed will return to 0.
2. Press –> to advance to subsequent digits, and change them in the same manner.
3. Press ENTR when complete. If an incorrect code is entered, the controller will return to the
Function Activation Setup menu, without installing the function. If this happens the above
process must be repeated.
The Function Activation Menu also includes a utility for disabling the password. Scroll through the
functions until the following is displayed:
Press ENTR to generate the request code, then follow the authorization code procedure as indicated
above.
7.3 Demo Mode
All ESM301 test stands are shipped in Demo Mode, which provides full functionality of all available
functions for an evaluation period of 160 operating hours. When this period has expired, an additional 160
hours may be added via the authorization code procedure indicated above.
C Y C L I N G : 0 1 3 9 0 2 7
E S C + − E N T R
D I S A B L E P A S S
O R D
E S C < − − > E N T R
To Next Page
Loading...
