Model WT3-201 Wire Crimp Pull Tester User’s Guide
24
15.2 Factory Settings
Parameter Setting
Set points
Upper Disabled (defaults to 80% of full scale when enabled)
Lower Disabled (defaults to 40% of full scale when enabled)
Filters
Current 8
Displayed 512
DATA Key Functions
RS-232/USB Output Enabled
Mitutoyo Output Disabled
Memory Storage Enabled
Backlight Auto
Minutes 1
Serial/USB
RS-232 Output Selected Enabled
USB Output Selected Disabled
Baud Rate 9,600
Data Format Numeric + units
Mitutoyo BCD Output Disabled
Break Detection Disabled
Threshold 5% of full scale
% Drop 50% of peak
Auto Zero Delay 5 sec.
Auto Output Settings All disabled
Auto Storage Disabled
Auto Zero Disabled
Automatic Shutoff Enabled
Minutes 5
Tones
Keys Enabled
Alerts Enabled
Set Points Momentary
Initial Settings
Units lbF
Mode Real Time
Passwords All passwords disabled
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
