Marksman X6 - Remote Start Feature Programming

sprihC eerhTsprihC owTprihC enO
Button One LED Pulse Two LED Pulses Three LED Pulses
(Default Setting)
Turbo Timer Control is Active
Press the ( + ) buttons before
removing the ignition key to activate
the 1 minute Turbo timer control. The
keyless entry system can lock the
doors while the engine is running
21
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Step 4: Exit Programming
Remote Start Feature Programming (Group 1) (continued)
(Default Setting)
Turbo Timer Control
Function is Off.
The keyless entry system can not
lock the doors while the engine is
running.
Turbo Timer Control is Active
Press the ( + ) buttons before
removing the ignition key to activate
the 3 minute Turbo timer control.
The keyless entry system can lock
the doors while the engine is
running
Turbo Timer Control is Active
Press the ( + ) buttons before
removing the ignition key to
activate the 5 minute Turbo timer
control. The keyless entry system
can lock the doors while the
engine is running
Four Chirps
Four LED Flashes
Notice:
The Turbo Timer
feature will not
operate when using
the 1 button
transmitter
Five Chirps
Four LED Flashes
The vehicle has an aftermarket
turbo timer installed. The keyless
entry system can lock the doors
while the vehicle is running.
X6-IM.qxp 9/12/2008 1:50 PM Page 21
+