Marksman X6 - Wiring; Plug-In Harness Information

15
Red/White Wire : Channel 3 (Trunk Release) Output
The Red/White will become grounded for 1 second when activated by the remote transmitter. The current
capacity of this wire is 200mA and may require an additional relay to operate properly.
87
86
85
30
(Relay Not Supplied)
Output to Power
Trunk Switch
To Constant +12 Volts
Input to Relay (+ or
- )
White
9-Pin Mini
Connector
Red/White
Wire
Wiring (continued)
Resistor
Yellow
Trucks: Orange/Black or Cars: Black
Passkey II Passive Anti-Theft Bypass
87
87A
85
86
30
To Vehicle's Ignition Wire
Trucks: Red/White or Cars: White
White 9-Pin
Mini Connector
Pink Wire
HC4: White 9 Pin Accessory Harness (continued)
P2 Valet Switch
Plug-In Harnesses
X6-IM.qxp 9/12/2008 1:50 PM Page 15