Installation
Triplematic
22 Triplematic 201708 EN
4.8 Test the machine before first use
1. Make sure that all packing materials are
removed.
2. Make sure that the air hoses and wires are
correctly connected.
3. Make sure that the machine is securely
fastened to the stand.
4. Make sure that the machine is on a level
surface; if the machine wobbles, or if the
surface is not level, attach the stand to the floor
with screws.
5. Perform a sharpening test on the machine to
ensure it functions correctly. See section 8.2,
“Sharpening test”.
To Next Page
Loading...
