Why does the metal of a cutter turn blue during grinding with my Markusson Triplematic?
The cutter metal turns blue because the grinding speed is set too high, causing the metal to overheat. Replace the damaged cutter or discard the chain. Lower the speed on the grinding speed knob.
What to do if the chain is not fixed during sharpening with my Markusson Grinder?
If the chain is not fixed during sharpening, it may be that the chain vise is loose, or the air pressure is too low. Check and adjust the air pressure.
Why are wrong parts of the cutters sharpened by my Markusson Triplematic?
Incorrect sharpening can occur if the pitch adjustment wing is not in the correct position for the type of chain used, or if a cutter was caught on the chain pusher because the chain pusher is worn out and the material is uneven. In the latter case: * Loosen the screw that holds the chain pusher in its position. * Discard the chain pusher in accordance with local, state, and national laws and regulations. * Attach a new chain pusher and fasten the screw. * Rasp the chain pusher until the material is even.
What to do if an incorrect number of cutting links are sharpened (too many or too few) by my Markusson Grinder?
An incorrect number of cutting links may be sharpened if an incorrect number of cutting links was set on the counter, or if the counter was not reset before the machine was operated.
Why is the top-plate angle too aggressive on my Markusson Grinder?
The top-plate angle setting is incorrect.
Why are the top-plate angles not the same when the grinding head turns in the 2 different directions on my Markusson Grinder?
The M6 nuts needs to be adjusted.
Why are the lengths of the right and left cutters not the same on my Markusson Triplematic?
The equal cutting teeth knob is incorrectly set.
Why is the wrong cutter sharpened by my Markusson Grinder?
The chain was in the incorrect position when the machine was started. Find the cutter to be sharpened and make sure that it is in the correct position before the machine is operated.
Crucial safety and operational guidance for users.
Overview of the manual's content and purpose.
Defines the machine's proper application and restrictions.
Lists applicable directives and standards for the machine.
Details found on the machine's nameplate.
Instructions for environmentally responsible disposal.
Explains the meaning of WARNING, CAUTION, and IMPORTANT notes.
Essential safety precautions for operating the machine.
Interpretation of visual cues for safety.
General description of the machine's capabilities and features.
Labels and descriptions of parts visible from the front.
Labels and descriptions of parts visible from the back.
Details about the grinding wheel and its guard.
Explanation of the pneumatic tensioner components and function.
Overview of control panel, counter, and speed adjustment.
Defines parts of a chain for sharpening context.
Lists electrical, mechanical, and dimensional specifications.
Safety measures to follow during machine installation.
Guidelines for selecting an appropriate installation location.
Steps for unpacking and verifying all parts are present.
Detailed instructions for assembling the grinder's stand.
Steps to assemble and connect the pneumatic chain tensioner.
Instructions for mounting the machine on a workbench.
Procedure for fitting and aligning the grinding wheel.
Final checks and tests before the first use of the machine.
Essential safety practices while operating the grinder.
Steps to ensure the grinding wheel is ready and correctly profiled.
Adjusting the grinding head angle for sharpening.
Adjusting the top-plate angle of the cutting teeth.
Procedure for placing and fixing the chain in the vise.
Adjusting parameters for optimal chain sharpening.
Instructions for operating the machine in skip tooth mode.
Step-by-step guide for sharpening chains.
Safety precautions during maintenance tasks.
Frequency and types of maintenance tasks.
How to change a worn or damaged grinding wheel.
Setting the correct depth gauge for chain sharpening.
Procedure to adjust the chain lock for secure sharpening.
How to check and adjust the machine's wire mechanism.
Important considerations for servicing the machine.
General steps to diagnose and resolve issues.
Method for testing machine performance and chain sharpening.
Table listing problems, causes, and solutions.
Explanation of indicator LEDs and their meanings.
Contact information and process for ordering.
Catalog of optional accessories for the grinder.
Diagram-based identification of spare parts.
Specific information on converters and stands.
To Next Page
General