Triplematic
Triplematic 201708 EN 9
Product Description
3.3 Back view
Pos Part Description
A Pitch adjustment wing Makes an approximate setting for the pitch.
B
Grinding head cover and grinding
wheel guard
Protects the grinding head and grinding wheel; it also protects the
user from sparks during grinding.
C Top-plate angle scale
Shows the top-plate angle on a scale from 0-35°. Default: 30°. It is
set using the top-plate angle screw (O in Front view illustration).
D Chain lock adjustment screw
Adjusts the width of the groove in the chain visewhen the chain
vise is in the LOCKED position.
E Top plate angle adjustment screw Sets the top plate angle equal left to right.
F Head-tilt angle scale
Shows the head-tilt angle on a scale from 50-70°.
Default: 60°.
G Wire Controls the vertical movement of the grinding head.
H Wire adjustment knobs
Adjusts the wire that controls the vertical movement of the grinding
head.
I Head-tilt angle nut Sets the head-tilt angle on the head-tilt angle scale. (D)
J Depth gauge height knob Sets the height of the depth gauge.
H
C
F
J
I
A
B
G
D
E
To Next Page
Loading...
