Triplematic
Triplematic 201708 EN 3
Introduction
1 Introduction
1.1 Important user information
WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual. Obey the instructions in this manual to prevent injuries or damage to the equipment.
1.2 About this manual
This user manual describes how to safely install, operate, and perform basic maintenance on the Triplematic Auto
Chain Grinder chain sharpening machine. This manual also describes the parts of the machine, and it shows
different accessories and spare parts that are available.
1.3 Intended use
The machine must only be used to sharpen the cutting chains used on power saws, forestry machines and
harvesters. It automatically sharpens the cutting teeth, gullets and depth gauges on chains. The machine is designed
for indoor use only.
Unintended use
The machine must not be used outdoors or in a manner that is not described in this manual.
1.4 Regulatory information
Regulations are given below. A copy of the EC Declaration of conformity is supplied with the machine.
WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual. Obey the instructions in this manual to prevent injuries or damage to the equipment.
Directive/standard Description
98/37 EC The Machine Directive (MD)
73/23 EEC as amended 73/23 EEC as amended The Low-Voltage Directive (LVD)
89-336/EEC as amended The Electro Magnetic Compatibility Directive (EMC)
EN-ISO 12100-1, 2 Safety of machinery - Basic components, general principles for design
EN 61000-6-3
Emission standard for residential, commercial and light-industrial
environments
EN 55014-1, 2
Electromagnetic compatibility - Requirements for household
appliances, electric tools and similar apparatus - Part 1: Emission
To Next Page
Loading...