- User Manual
This product conforms to the following directives:
•
2014/30/UE EMC directive
• 2011/65/UE RoHS
The applicable standards are:
•
EN 61326-1 (EMC)
•
EN 61010-1 (SAFETY)
• EN 50419 RoHS
This product conforms to the following regulations:
•
SI 2016/1091 EMC
•
SI 2016/1101 Sicurezza apparecchi elettrici
•
SI 2012/3032 RoHS
The applicable standards are:
• EN61326-1 EMC
• EN61010-1 Safety
• EN 50419 RoHS
INFORMATION FOR USERS
Concerning the terms of the National Legislation enforcing the Directive
2012/19/EU on waste electrical and electronic equipment (WEEE).
The wheelie bin symbol with a cross through it on the equipment or its packaging indicates that the
product must be disposed of separately from other waste materials at the end of its working life.
If the user wishes to dispose of this equipment, he/she must do so in accordance with the applicable
National regulations governing the separation of the unit into its waste materials at the end of its
working life.
Separating waste materials correctly before submitting the equipment for recycling, treatment and
environmentally compatible disposal can help to prevent potentially negative effects on health and the
environment, as well as making it easier to reuse and/or recycle its constituent materials.
Failure to dispose of this product in accordance with these indications is punishable in accordance with
the applicable laws.
ABOUT THE DIRECTIVE “ROHS” REGULATING THE PRESENCE OF CERTAIN
HAZARDOUS SUBSTANCES IN ELECTRICAL AND MARPOSS ELECTRONIC EQUIPMENT
http://www.marposs.com/compliance_detail.php/eng/rohs
ABOUT POSSIBLE USE IN MARPOSS PRODUCTS OF MATERIALS COMING
FROM CONFLICT AREAS, REFER TO:
http://www.marposs.com/compliance_detail.php/eng/conflict_minerals
To Next Page
Loading...