marposs M32A - General Safety Indications; Key to Symbols; Technical Assistance

- User Manual
6
1.4 General safety indications
The safety of any system incorporating the equipment is the responsibility of the assembler of the system.
Follow the machine tool manufacturer's safety procedures. Follow all safety procedures when installing the
system. In the event of uncertainty, contact the service department.
Attention
Make sure that the machine safety devices deactivate the electrical arm motor power supply.
1.5 Key to symbols
Various different text formats were used when preparing this manual.
There various types of safety warnings are as follows:
Attention
This symbol indicates the presence of risk conditions for the operator or technician.
i
Note
Data that refer to the correct use of the equipment.
Symbol that identifies the DC power supply (Direct current).
1.6 Technical Assistance
When placing a request for technical assistance request, refer to the data displayed on the identification la-
bel (see Figure 1-1).
The correct reference ensures quick and accurate answers. In the event of a fault condition that requires the
assistance of Marposs personnel, contact the nearest service centre (visit the website www.marposs.com for
a list of distributors).
If any operations carried out on the product without written authorisation of the manufacturer, or performed in
such a way as to compromise its correct operation or modify its specifications, the manufacturer declines all
responsibility in the event the application fails to function correctly.
The warranty, as agreed in the contract, will be declared null and void in the event of any unauthorised modi-
fications being carried out. Therefore, any modification or operation not expressly mentioned in this technical
document is to be considered unauthorised. If the necessary procedures are not described in this manual,
contact the equipment dealer or manufacturer.
The warranty, as agreed in the contract, will be declared null and void in the event of any unauthorised modi-
fications being carried out. Therefore, any modification or operation not expressly mentioned in this Manual
is to be considered unauthorised.
When requesting assistance from Marposs customer service, please provide the following information:
Label containing the unit code no. (MODEL:
83033228XX) and serial number (SERIAL No.)
Figure 1-1 Identification label.