Marquette Hellige GmbH MicroSmart V 2.xx Page 59
Servicing Instructions 227 470 35 B - 97.12
9 Technical description
Recording
Direct recording of curves, waveforms and alphanumerical characters in rectangular coordinates
using the thermal dot printing method on thermo-sensitive paper.
* Recording channels 3 or in "Man" mode 3 or 1, overlapping recording allowed
* Trace spacing with 3-channel: 25 mm
* Writing width max. 80 mm
* Printout of unit setting data, date and time, on the margins of the recording paper
* With appropriate variation, printout of measuring results on separate sheet
* Resolution of recording:
vertical 8 dots/mm
horizontal 25 µm at 25 mm/s
Recording paper
Z-fold paper with 350 sheets Marquette Hellige CONTRAST
Paper width 90 mm
Sheet length 90 mm
or
Paper rolls Marquette Hellige CONTRAST
Paper width 90 mm
Length approx. 35m
To avoid damage of the thermal array, use only original Marquette Hellige CONTRAST
recording paper.
Paper feed
* Paper speed
5 - 25 - 50 mm/s reversible via function key.
error limits typ. ±1% max. ±5%
* Acoustic signal and shutdown of recording when paper end is reached.
Before end of paper, red mark on lower margin of paper sheet.
Membrane keyboard
Pushbuttons with tactile feedback
Function keys for all important routine operations
Display
Alphanumeric LCD, 2 x 16 characters, contrast setting allowed
To Next Page
Loading...