Page 27
Input 1 time delay before sending SMS (seconds): Minimum required time of stable
condition on alarm input to be acknowledge as valid alarm event, SMS notification is send
out after valid alarm condition.
Input 2 mode: Different mode of possible input configuration:
1. Normally open – negative triggered: Input activation with negative voltage (GND).
2. Normally closed: Input activation when breaking positive or negative voltage loop.
3. Normally open – positive triggered: Triggered with positive voltage (+ 12V DC).
4. Not used: Alarm input disabled.
5. Normally open – negative triggered – SMS on restore: Same as option 1 + unit send
restore SMS when alarm conditions on input are ceases to exist.
6. Normally closed – SMS on restore: Same as option 2 + unit send restore SMS when alarm
conditions on input are ceases to exist.
7. Normally open – positive triggered – SMS on restore: Same as option 3 + unit send
restore SMS when alarm conditions on input are ceases to exist.
Input 2 time delay before sending SMS (seconds): Minimum required time of stable
condition on alarm input to be acknowledge as valid alarm event, SMS notification is send
out after valid alarm condition.
Output SMS notification labels:
Location identification: Head od the SMS text idetifying the location/name of the unit.
Input 1 identification: Naming for Input 1 alarm event.
Input 2 identification: Naming for Input 2 alarm event.
To Next Page
Loading...