MARS COMMERCE GSW2 PLUS - 4 START UP

GSW2 PLUS
USER MANUAL
Page 7
4 START UP
GSW2 PLUS unit accepts a standard GSM SIM cards from any network.
VERY
IMPORTANT
USE A MICRO SIM CARD
WARNING
DO NOT Insert or remove the SIM card while the unit is powered ON!!
IMPORTANT
Before inserting SIM card to unit make sure the PIN code is
removed!!
 Insert SIM card in GSW2 PLUS unit.
 Connect power cable to GSW2 PLUS unit (YOU MUST POWER THE GSW2 PLUS UNIT
WITH THE POWER SUPPLY IF INCLUDED. Do not power with any other power
supply).
 Power up the unit.
 Wait until LED1 (blue) starts flashing. This is set in around 30 – 45 seconds.
 GSW2 PLUS unit is now ready to operate.