MARS COMMERCE ZEUS4-MC Lite - Table 5: ID Parameters; Table 6: ID Parameters Example; Table 7: DD Parameters; Table 8: DD Parameters Example

ZEUS4-MC Lite
INSTALLATION MANUAL
12
10.2.2 ID parameters
ID parameter determines time period of the pulse length to trigger the Input. The pulse time can be
from 0.5 seconds to 9999 seconds. Minimum time is 0.5 seconds when the parameter value is 0.
Table of parameters:
Name
Comment
ID1
Default ID filter is 0.5 seconds – input 1
ID2
Default ID filter is 0.5 seconds – input 2
Table 5: ID parameters
Example:
 Direct programming on the SIM card
ZEUS4-MC LITE PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
ID1
5
ID filter is 5 seconds for input 1
ID2
30
ID filter is 30 seconds for input 2
Table 6: ID parameters example
 Remote programming by SMS
;ID1=5;ID2=30;
10.2.3 DD parameters
If you would like to have a delay before unit starts dialing procedure use DD – delay before dialing
parameter.
Table of parameters:
Name
Comment
DD1
Delay before dialing for Input 1
DD2
Delay before dialing for Input 2
Table 7: DD parameters
Example:
 Direct programming on the SIM card
ZEUS4-MC LITE PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
DD1
1
Delay before dialing is 1 seconds for input 1
DD2
2
Delay before dialing is 2 seconds for input 2
Table 8: DD parameters example