MARS COMMERCE ZEUS4-MC Lite - GPRS-TCP;IP CONNECTION; GENERAL CONFIGURATION; EVENT REPORTING

ZEUS4-MC Lite
INSTALLATION MANUAL
45
20 GPRS-TCP/IP CONNECTION
To start GPRS-TCP/IP connection for the first time the user must first send SMS with the GPRS-
TCP/IP parameters (check 19.GPRS-TCP/IP CONFIGURATION). The user can send all
parameters in one SMS message (Do not exceed 160 characters!).
20.1 GENERAL CONFIGURATION
To start/enable GPRS-TCP/IP connection next parameter are MANDATORY.
Mandatory GPRS-TCP/IP settings
;IPEN=1;
Default, no need for sending.
;IPAPN=value;
Set appropriate APN string.
;IPADD1=value;
Set appropriate server IP address.
;IPPORT=value;
Set appropriate server IP port.
Table 33: Mandatory GPRS-TCP/IP connection parameters
To start/enable GPRS-TCP/IP connection next parameter are USUALLY NEEDED.
Usually needed GPRS-TCP/IP settings
;IPUSR =value;
Set appropriate GPRS user name.
;IPPSW=value;
Set appropriate GPRS password.
Table 34: Usually needed GPRS-TCP/IP connection parameters
NOTE
Device can’t merge data from 2 consecutive SMS messages.
20.2 EVENT REPORTING
To enable event reporting over the GPRS-TCP/IP interface next parameters are in use
Event reporting GPRS-TCP/IP setting
;IPCID=1;
Default, no need for sending.
Table 35: Event reporting parameters
NOTE
To define the ID of the ZEUS S-LITE-GPRS device use #0 parameter
Example:
;#0OBJECT=1111; 1111 is the object code of the ZEUS S-LITE-GPRS device
To define Contact ID for different inputs please use #0 … #1
Example:
;#1Input1=130; Input1 is Burglary