MARS COMMERCE ZEUS4-MC Lite - EVENT LOG PARAMETERS

ZEUS4-MC Lite
INSTALLATION MANUAL
28
10.6 EVENT LOG PARAMETERS
ZEUS4-MC LITE has a small set of parameters to manage log memory.
10.6.1 LOGN parameter
LOGN parameter is used to define the number of log events that will be send out in case of ;PLOG;
command
10.6.2 LOGI parameter
LOGN parameter is used to enable and define ZEUS4-MC LITE log storage.
 LOGI=0 Logging is OFF
 LOGI=1 Logging in internal memory
 LOGI=2 Logging to USB interface
10.6.3 ALC parameter
ALC parameter defines an action in case when the LOG memory is FULL
 ALC=0 Automatically delete buffer when memory is FULL
 ALC=1 Memory buffer must be deleted manually when it is FULL
Table of parameters:
Name
Comment
LOGI
Log storage
LOGN
Number of log events for print
ALC
Control for memory handling in case memory storage is full
Table 29: LOG parameters
Example:
 Direct programming on the SIM card
ZEUS4-MC LITE PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
LOGI
1
Use internal ZEUS4-MC LITE storage
LOGN
10
Send 10 events in case of PLOG request
ALC
1
Automatically delete memory buffer when is full
Table 30: LOG parameters example
 Remote programming by SMS
;LOGI=1;LOGN=10;ALC=1;