MARS COMMERCE ZEUS4-MC Lite - Table 15: os Parameters; Table 16: os Parameters Example; Table 17: OD Parameters

ZEUS4-MC Lite
INSTALLATION MANUAL
16
 OS = 0 – Selected output is disabled
 OS = 1 – Selected output is in bi-stable toggle mode
 OS = 1 – Selected output is in mono-stable pulse mode
Table of parameters:
Name
Comment
OS1
Control for the 1
st
output
OS2
Control for the 2
nd
output
Table 15: OS parameters
Example:
 Direct programming on the SIM card
ZEUS4-MC LITE PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
OS1
1
Bistable toggle mode
OS2
14
Monostable pulse mode ( 14s pusle )
Table 16: OS parameters example
 Remote programming by SMS
;OS1=1;OS2=14;
10.2.8 OD parameters
OD parameters are used to link alarm events directly to output. OD1 and OD2 are used to link input
events to output, other are used for internal function notification.
Table of parameters:
Name
Comment
OD1
Input 1 direct link to output
OD2
Input 2 direct link to output
OD5
Telephone line failure
OD6
GSM network error
OD7
System tamper
OD11
CID transfer error
Table 17: OD parameters
Example:
 Direct programming on the SIM card